LABOM - aşaği qiymətlərlə almaq famaga.az rəsmi sayti

CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020

PRESSURE TRANSMITTER PASCAL Ci4 for diaphragm seal operation, hygienic process connection bottom see data sheet D4-016-2 CI4110 nominal range: 0...4 bar, Turndown max. 100:1, overload limit 10 bar; sensor type piezoresistiv A1056 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below -1...+3 bar H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English M21.1 Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 2 material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 T30 electrical connection: circular connector M12 x 1 (4 pin) K1085 design: standard X3 temperature compensation: active temperature compensation ATC marking: stainless steel Tag-plate, fixed with stainless steel wire, marking see below W4022 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement process connection: DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 3 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 2 1/2" / PN 16 430 hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 T14 temperature, media: -10..+150 °C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Xahişi ilə

Qiyməti öyrənmək

MZ1100-B64-W2002 CV3110-A1059-F80-H2100-M1-N10-T30-K1085-W4022-W2674 BH5200 ECO-A99-W5124-W2674 DL8090-HY-D2546-E7-G7-H2-A400-L23-T99-W4035-W1020

MZ1100 COMBIBAR PRESSURE MEASURING SYSTEM B64 drawing no.: PD-WV-00178 BOURDON TUBE PRESSURE GAUGE: W2002 CALIBRATION PROTOCOL: with 5 measuring points PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 4,000 unit: bar H21 output signal: 4...20 mA with HART function module 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N10 switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 electrical connection: circular connector M12x1 (4 pin) K1085 design standard process temperature 0...+125 °C, short term up to +140 °C, 1 h ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 W2674 EAC-TR certification exemption statement PRESSURE GAUGE DN 100 ECOnomic for food/pharmaceutical/biotechnology acc. to data sheet D2-028-5 BH52 00 case design: IP 65, process connection bottom A99 nominal range: see below -1 ... 4 bar overload protected: 1.3 times pointer: with micro adjusting device for zero-point correction CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 W2674 EAC-TR certification exemption statement DIAPHRAGM SEAL for food/pharmaceutical/biotechnology see data sheet D5-024-3 DL8 090 design: process connection per INGOLD hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm HY D25 process connection: DN 25, hexagon union nut A/F 46, G 1 1/4" 46 insertion length: h = 46 mm E7 basic body material: stainless steel mat.-no. 1.4435 (316L), wetted part G7 diaphragm material: stainless steel mat.-no. 1.4435 (316L) H2 gasket: per EPDM -FDA A400 connection of meas. instrument directly welded system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 DMB_729 T99 temperature, media: see below +10...+150°C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Xahişi ilə

Qiyməti öyrənmək

BE4200-A2999-L4600-W4022-W5124-W1020-W2002-W2674

Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 BE4 2 case: NS 100 per EN 837-1 S1 0 case design: IP 65, process connection bottom 0 explosion protection: without A2 pressure connection: G 1/2 B 999 nominal range: see below -1 ... 6 bar L4 switch contact: magnetic snap contact 600 switch function: 1 x min. change over contact electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1020 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement

Xahişi ilə

Qiyməti öyrənmək

BE4220-A2092-L4120-W4020

Pressure gauge BE4 - Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 case: NS 100 per EN 837-1 S1 2 - case design: IP 65 with case filling, process 2 - connection bottom 0 - explosion protection: without A2 - pressure connection: G 1/2 B 092 - nominal range: -1...15 bar L4 - switch contact: magnetic snap contact 120 - switch function: 1 x max. closed- + 1 x max. open contact electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 - ADDITIONAL DESIGN: marking (adhesive label), see below

Xahişi ilə

Qiyməti öyrənmək

CA1110-A3058-H1-T120.1-K193

PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation, hygienic see data sheet D4-019-6 pressure sensor thin film for gauge pressure measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) output signal: 4...20 mA, 2-wire technology electrical connection: circular connector M12, pin connection: 1=(+) 2= (-) degree of protection: IP 65 (standard) process connection: screw-in thread G 1/2 A, incl. gasket material NBR flush mounted diaphragm with backup ring material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed

Xahişi ilə

Qiyməti öyrənmək

CC6010-A1011-H1-T110 DL3300-HY-A4007-L22

CC6 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation 01 design: standard see data sheet D4-020-5 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 011 measuring range 0...400 mbar, overload limit 3 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. with limited accuracy Tk < 0.4% / 10K H1 output signal: 4...20 mA, 2-wire technology T110 electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, Form A), IP 65 DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 3 design with clamp connection see data sheet D5-026 300 process connection: per ISO 2852 for pipes per ISO 2037, DN 51 / PN 16 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process -10...+140 °C

Xahişi ilə

Qiyməti öyrənmək

1112040/01/003

CS2110-A1009-F2-H11-N10-T30-K1085-K195 CS2110 A1 pressure sensor: piezoresistive for gauge pressure measuring range 0...160 mbar, overload limit 1 bar measuring accuracy: linearity, hysteresis, repeatability 0.5 mbar of measuring range 009 F2 parameterization: see below Anzeige: 0 - 100 % (entspricht 0 - 160 mbar) H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: screw-in thread G1 A / PN 50 material stainless steel ASTM 316L, with O-ring-gasket material NBR system filling: Synthetic oil, free of silicon FD1, FDA listed K195 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Xahişi ilə

Qiyməti öyrənmək

CS2110-A1090-H11-N10-T30-K1085-K136

CS2110 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure measuring range -1...5 bar, overload limit 20 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span 090 H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: Tri-Clamp, DN 1" / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listedH1 K136 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Xahişi ilə

Qiyməti öyrənmək

CA2110-A1054-H11-T30-K1085-K195

CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic A1 pressure sensor: piezoresistive for gauge pressure measuring range 0...1.6 bar, overload limit 10 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span 054 H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: screw-in thread G1 A / PN 50 material stainless steel ASTM 316L, with O-ring-gasket material NBR system filling: Synthetic oil, free of silicon FD1, FDA listed K195 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Xahişi ilə

Qiyməti öyrənmək

CI4330-A1053-F1-H21-M22.2-Y12-T200 (+/-) DD4100-B50197L-L23-T63

CI4330 DIFFERENTIAL PRESSURE- AND LEVEL TRANSMITTER PASCAL Ci4 DELTA P see data sheet D4-071-2 A1053 1 bar, Turndown max. 100:1 overload limit +side 20 bar overload limit -side 10 bar static excess pressure max. 75 bar, both sides accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F1 parameterizing: standard, see data sheet H21 output signal: 4...20 mA with HART M22.2 high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, Chinese), default setting Chinese Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 2 material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 T20 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm 0 cable clamps: spring clip terminals up to 1.5 mm2 mounting diaphragm seal +/-side Diaphragm seal for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 100 nominal width/pressure: DN 50 / PN 40 B50 connection of meas. instrument with capillary and protective tube, directly welded 19 length of capillary 2 m 7L material wetted parts: stainless steel mat.-no. 1.4435 (316L), membrane LTC-TECHNOLOGY L23 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered T63 operating temperature: -10...+140 °C

Xahişi ilə

Qiyməti öyrənmək

PH5100

PH5100-A1-F11 UNIVERSAL panel indicator acc. to data sheet M6-051 LED display, 5-digits, red, 16 mm high 96 x 48 mm housing format, depth 32 mm front protection IP 65 2 alarm outputs as relay electrical supply: 24 V DC +/- 15%, 50 mA processible sensor signal: current 0(4)...20 mA voltage 0...5/10 V 0...50 mV temperature Pt100, thermocouples supply: 100 to 240 VAC +/-10 %, 50/60Hz, 6 VA configuration: without configuration

Xahişi ilə

Qiyməti öyrənmək

CE6120-A1060-K1020-T120-H1

COMPACT PRESSURE TRANSMITTER with threaded connection design: flush mounted diaphragm, with temperature decoupler Ex-protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. process connection: threaded connection nominal width: M22 x 1.5 with O-ring and sealing washer gasket material: NBR electrical connection: circular connector M12, IP 65, union nut of polyamide output signal: 4...20 mA, 2-wire technology

Xahişi ilə

Qiyməti öyrənmək

CB2020-A1999-H1-T1-W4029

Druckmessgerät

Xahişi ilə

Qiyməti öyrənmək

CV3110-B1059-F10-H1100-M1-N50-T31-K1085 DD4100-HY-A4007-L22

CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 B1 pressure sensor: piezoresistive for absolute pressure 059 nominal range: 0...16 bar abs., overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F10 measuring range: 0...16.00 bar abs. H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 0 switching module setting: standard, see below 1. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard 2. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard DD4 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 100 nominal width/pressure: DN 50 / PN 40 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C

Xahişi ilə

Qiyməti öyrənmək

GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1

GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1 GA2700-HY RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 A14 process connection: clamp connection 23 nominal width: per ISO 2852, DN 25 / 38 (1" / 1 1/2"), ø 50.5 mm C1 temperature detecting element: ø 6 mm 050 insertion length U1: 50 mm G11 material wetted parts: stainless steel mat.-no. 1.4404 (316L) N2 measuring resistor: 1 x Pt100, 3-wire technology, standard T150 electrical connection: circular connector M12 x 1 (4 pins) Z52 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) W2002 CALIBRATION PROTOCOL: with 5 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F11 configuration: standard measuring range: 0...+100 °C, standard error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard H1 output signal: 4...20 mA, standard

Xahişi ilə

Qiyməti öyrənmək

GA2510

GA2510-A101-B43-C121300-D2-M22-N2-T11-W2674 GA251 RESISTANCE THERMOMETER Pt 100 with thermowell see data sheet T4-025-2 0 explosion protection: without A10 process connection: G 1/2 B 1 material process connection: stainless steel mat.-no. 1.4571 (316Ti) B43 thermowell length total L: 395 mm C12 thermowell diameter: F1 = 9 mm 1 material thermowell: stainless steel mat.-no. 1.4571 (316Ti) 300 insertion length U1: 300 mm length of measuring insert l5: 405 mm D2 measuring insert: ø 6 mm, rigid M2 tolerance: class A per DIN EN 60751 2 application range: -50...+400°C N2 sensor type: 1 x Pt100, 3-wire technology T11 connection head: model B, cap with 2 slotted screws, IP 54 material: aluminium electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass W2674 EAC-TR certification exemption statement

Xahişi ilə

Qiyməti öyrənmək

CA2110-A1091-H11-T30-K2285-K147-HY-W1020-W2002

CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K2285 design: with temperature decoupler (up to 175 °C) K147 process connection: clamp connection per DIN 32676, DN 40 / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature: -20...+175 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W2002 CALIBRATION PROTOCOL: with 5 measuring points NOTE: ************** Please refer to the current order code. The requested code is outdated and no longer valid. Custom-Tariff-No.: 90262020

Xahişi ilə

Qiyməti öyrənmək

W1301

0…+10Bar 4-20mA 2-Draht,M12 Ra0,8mM G1/2"B

Xahişi ilə

Qiyməti öyrənmək

CA1100-A3058-H1-T120-K10

CA1100 PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection A3 pressure sensor thin film for gauge pressure 058 measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K10 process connection: G 1/2 B per DIN EN 837-1 Custom-Tariff-No.: 90262020

Xahişi ilə

Qiyməti öyrənmək

CA1110-A3059-H1-T120-K144-HY-W1020-W1201-W1223

CA1110 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation A3 pressure sensor thin film for gauge pressure 059 measuring range: 0...16 bar, overload limit 100 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K144 process connection: clamp connection DN 25 / PN 25, ø 50.5 mm per DIN 32676 model A for pipes per DIN 11850 material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1201 INSPECTION CERTIFICATE 3.1 calibration certificate with 5 measuring points W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 Custom-Tariff-No.: 90262020

Xahişi ilə

Qiyməti öyrənmək

CV3110-B1059-F10-H1100-M1-N10-T31-K1085

CV3110-B1059-F10-H1100-M1-N10-T31-K1085 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 pressure sensor: piezoresistive for absolute pressureB1 nominal range: 0...16 bar abs., overload limit 60 bar059 measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) measuring range: 0...16.00 bar abs.F10 output signal: 4...20 mA, rising characteristic (standard)H11 setting damping: 0.0 sec. (standard)0 setting alarm state: < 3.6 mA (standard)0 display module: withoutM1 screw cap closed, without window switching module: withoutN10 case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 electrical connection: circular connector M 12x1 (8 pin)T31 design standardK1085 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 DD4 nominal width/pressure: DN 50 / PN 40100 connection of meas. instrument directly welded A400 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C

Xahişi ilə

Qiyməti öyrənmək

CA1110-A3058-H1-T120-K136-HY06-W1020-W1201-W1223

CA1110 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation A3 pressure sensor thin film for gauge pressure 058 measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K136 process connection: clamp connection DN 1" / PN 25, ø 50.5 mm per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY06 hygienic design per EHEDG Doc.8 and ASME BPE SF1: surface roughness (wetted parts) - turned parts Ra <= 0.51 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1201 INSPECTION CERTIFICATE 3.1 calibration certificate with 5 measuring points W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra Custom-Tariff-No.: 90262020

Xahişi ilə

Qiyməti öyrənmək

GA2610-A4254-M23-N32-T150-Z52-W4020-W2004 PA2430-F12-H1

# For piping 1 inch # GA261 RESISTANCE THERMOMETER Clamp-on technology for temperature measurement on pipes see data sheet T4-028 0 explosion protection: without A4 clamping element: for collar installation 254 for pipe external diameter: 25.4 mm M23 material insulating sleeve: PVDF (-40...+150 °C) N32 measuring resistor: 1 x Pt100, per DIN EN 60751 class A, 4-wire technology T150 connection head: circular connector M12 x 1 (4 pins) Z52 transmitter mounting: integrated in the circular connector M12, Type PA2430 W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2004 CALIBRATION PROTOCOL: with 3 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA damping: 0 s, standard H1 output signal: 4...20 mA, standard Custom-Tariff-No.: 90251900

Xahişi ilə

Qiyməti öyrənmək

CB6010-A1060-H1-K1010-T110

COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 design: internal diaphragm explosion protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. output signal: 4...20 mA, 2-wire technology process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

Xahişi ilə

Qiyməti öyrənmək

GA2610-A4127-M23-N32-T150-Z52-W4020-W2004 PA2430-F12-H1

# For piping 0,5 inch # GA261 RESISTANCE THERMOMETER Clamp-on technology for temperature measurement on pipes see data sheet T4-028 0 explosion protection: without A4 clamping element: for collar installation 127 for pipe external diameter: 12.7 mm M23 material insulating sleeve: PVDF (-40...+150 °C) N32 measuring resistor: 1 x Pt100, per DIN EN 60751 class A, 4-wire technology T150 connection head: circular connector M12 x 1 (4 pins) Z52 transmitter mounting: integrated in the circular connector M12, Type PA2430 W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2004 CALIBRATION PROTOCOL: with 3 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA damping: 0 s, standard # device acc. old fab.-no.: 1604324/03/004 # Custom-Tariff-No.: 90251900

Xahişi ilə

Qiyməti öyrənmək

PA2200-F12-H1

PA2200-F12-H1 PA2200-F12-H1 TEMPERATURE TRANSMITTER head mounted, SIEMENS Sitrans TH200, 2-wire, universal programmable digital transmitter with electrically isolated input / output wire-break and short-circuit monitoring for sensor diagnostic LED for checking sensor and internal device operation test jacks for monitoring the output signal without breaking the current loop explosion protection: without configuration: see below 0...250 °C H1 signal of sensor breakage: 22.8 mA sensor offset: 0 °C damping: 0 s output signal: 4...20 mA; 2-wire circuitry

Xahişi ilə

Qiyməti öyrənmək

BH4220-A90

BH4220-A90 DL5110-S4101-A4007-L22 BOURDON TUBE PRESSURE GAUGE with diaphragm seal connection, chemical design acc. to data sheet D2-029

Xahişi ilə

Qiyməti öyrənmək

GA2510-A701-B99-C121128-D2-M22-N3-T11

GA251 RESISTANCE THERMOMETER Pt 100 with thermowell see data sheet T4-025-2 GA251 explosion protection: without0 process connection: G1/2 B, A/F 22A70 material process connection: stainless steel mat.-no. 1.4571 (316Ti)1 thermowell length total L (mm): 282,00B99 thermowell diameter: F1 = 9 mmC12 material thermowell: stainless steel mat.-no. 1.4571 (316Ti)1 insertion length U1: 128 mm128 measuring insert length l5 (in mm): 292,000 measuring insert: ø 6 mmD2 tolerance: class A per DIN EN 60751M2 application range: -50...+400°C2 sensor type: 1 x Pt100, 4-wire technologyN3 connection head: model B, cap with 2 slotted screws, IP 54 material: aluminium T11 electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass

Xahişi ilə

Qiyməti öyrənmək

CA1100-A3088-H1-T120-K10

CA1100 PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection A3 pressure sensor thin film for gauge pressure 088 measuring range: -1...1.5 bar, overload limit 6 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K10 process connection: G 1/2 B per DIN EN 837-1 Custom-Tariff-No.: 90262020

Xahişi ilə

Qiyməti öyrənmək

CB6010-A1089-H1-K1010-T110

CB6 design: internal diaphragm01 explosion protection: without0 pressure sensor: piezoresistive for gauge pressureA1 measuring range -1...3 bar, overload limit 20 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. 089 output signal: 4...20 mA, 2-wire technologyH1 process connection: G1/2 B nach DIN 837-1K1010 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

Xahişi ilə

Qiyməti öyrənmək

LABOM kataloqundan istənilən məhsulun sərfəli qiymətə satışı

LABOM – səhifə 5

LABOM kataloqundan istənilən məhsulun sərfəli qiymətə satışı

Burada başqa brendlərin məhsullarını ala bilərsiniz

LABOM kataloqundan istənilən məhsulun sərfəli qiymətə satışı

LABOM – səhifə 5

LABOM kataloqundan istənilən məhsulun sərfəli qiymətə satışı

Burada başqa brendlərin məhsullarını ala bilərsiniz

Tələbnamə qoyun